WhyKnowledgeHub
WhyKnowledgeDiscovery >> WhyKnowledgeHub >  >> home garden >> home improvement >> home DIY >> drywall plaster

DIY Drywall Repair: Easy Fixes for Holes and Damage

 
Drywall Repair Browse the article Drywall Repair

Drywall Repair

Tough as it is, drywall can withstand only limited abuse. A door flung open with too much force can produce a doorknob-size hole in the wall. This kind of damage looks bad, but even large holes are easy to fix.

The easiest way is to purchase a drywall repair kit. Measure the hole, and visit your local hardware store or home improvement center for a kit. There are various sizes and types for different applications. For example, a drywall patch for a ceiling is thicker than one for a wall. Before you use the kit, remove any loose paper or plaster around the edges of the hole. Then apply drywall patch, following the manufacturer's instructions.

In this article, we'll tell you how to fix both a small and a large drywall hole. We'll start with a small hole on the next page.

Not what you're looking for? Try these:

  • Materials: Just having the tools you need on hand for repairs isn't always enough to do the job. You'll often need various materials, such as lumber or drywall, to complete a task. Check out this article for tips on materials.
  • Drywall: Drywall, also known as gypsum board, is the building material used to put up interior walls in a home or other building. Find out all about drywall in this helpful article.
  • How to Install Drywall: Hanging drywall can be done by a do-it-yourselfer, but joining the pieces together does take some practice. Learn how to install drywall in your home.

How to Repair a Small Drywall Hole

To make a repair to a small drywall hole without a kit, follow these directions:

Step 4: Use putty knife to apply premixed drywall patching compound over patch following manufacturer's instructions. (Don't use spackling compound because it shrinks as it dries.) You can also mix plaster of paris with water to make thick paste. Pack compound or plaster into hole against backing and behind stick. Keep compound inside hole, cover backing, and fill slits, but don't spread it on wall surface. Leave patch slightly low, and don't try to level it. Let patch dry until it turns bright white, typically at least 24 hours. When dry, cut string or wire and remove stick.

Step 5: To finish patch, fill it completely with more plaster of paris or drywall patching compound to make patch level with wall surface. Let dry, lightly sand area, prime, and paint.

In the next section, we'll get more ambitious and find out how to fix a large drywall hole.

Not what you're looking for? Try these:

  • Materials: Just having the tools you need on hand for repairs isn't always enough to do the job. You'll often need various materials, such as lumber or drywall, to complete a task. Check out this article for tips on materials.
  • Drywall: Drywall, also known as gypsum board, is the building material used to put up interior walls in a home or other building. Find out all about drywall in this helpful article.
  • How to Install Drywall: Hanging drywall can be done by a do-it-yourselfer, but joining the pieces together does take some practice. Learn how to install drywall in your home.
What You'll Need

Here's what you'll want to have on hand when fixing a small drywall hole:

  • Clean tin can lid
  • Tape measure
  • Keyhole saw
  • Awl
  • Thin wire or string
  • Scissors or wire cutters
  • Scrap wood
  • Putty knife
  • Drywall patching compound
  • Sandpaper
  • Primer and paint
  • Paintbrushes

How to Repair a Large Drywall Hole

Step 3: Use spackling compound or wallboard joint compound as glue to hold patch in place. Spread compound on back of drywall patch and around edges. Set patch into hole and adjust it so it's exactly even with surrounding wall. Hold it in place until compound starts to set. Let compound dry at least overnight.

Step 4: Once compound is dry, fill patch outline and cover exposed screw heads with spackling or joint compound. Let dry, lightly sand area, prime, and paint.

With these tips under your belt, you should be ready to tackle those unsightly holes, and keep your drywall looking its best.

Not what you're looking for? Try these:

  • Materials: Just having the tools you need on hand for repairs isn't always enough to do the job. You'll often need various materials, such as lumber or drywall, to complete a task. Check out this article for tips on materials.
  • Drywall: Drywall, also known as gypsum board, is the building material used to put up interior walls in a home or other building. Find out all about drywall in this helpful article.
  • How to Install Drywall: Hanging drywall can be done by a do-it-yourselfer, but joining the pieces together does take some practice. Learn how to install drywall in your home.
What You'll Need

Here's what it will take to fix a large drywall hole:

  • Scrap piece of drywall
  • Utility knife
  • Pencil keyhole saw
  • Small board
  • Flathead screws
  • Screwdriver
  • Spackling or wallboard joint compound
  • Putty knife
  • Sandpaper
  • Primer and paint
  • Paintbrushes